Digital Wireless Indoor Outdoor Remote Floating Pond Thermometer Baby Bath Spas

Description

♥
What You Get:
(Wireless Version)
1*IBS-P01R Pool Thermometer
1*Indoor Unit
1*English Manual
Features:
🛀Wireless Connection:
The maximum connection distance is 300 feet. You can check temperature readings with
the receiver without going outside the room.
🛀Accurate Reading:
Support both Fahrenheit and Celsius readings.
🛀Premium quality:
The thermometer has adopted high quality materials, it is solid and durable.
🛀Multiple Uses:
The IPX7 waterproof thermometer is ideal for Indoor&Outdoor use like swimming pools,
Fish Ponds, aquariums, baby bath, spas etc. Ranges from -40℃~70℃(-40℉~158℉).
🛀Attention:
After installing, please pay attention to tightening the product to prevent water.
MAX/MIN/CLEAR:
1.Quickly press:
Press to display the maximum minimum temperature.
When there is no button operation, the current temperature display will be restored after 30s.
2.Long press(5s):
long press to clear the maximum inimum temperature record value, then re-record.
Details:
1.Quickly press:
Send temperature data to the Temperature and humidity monitor, when the transmission is successful,
the red light of wireless remote sensor will flash once.
2.Long press(5s):
Reset the synchronization between the Wireless remote sensor and the Temperature and humidity monitor.
Sensor displays CH8, indicating that the reset is successful.After resetting, the wireless remote sensor
needs to be powered on again (Can be synchronized within 2 minutes after the wireless remote sensor is re-powered on)
When synchronizing try to make the Wireless remote sensor close to the Temperature and humidity monitor and please do not press any button.
3.Flexible
Add an Inkbird M1 WiFi Gateway (sold separately) to pair with Pool Thermometer for data and alerts via the Internet.
Specification:
Button Icon Description
●CH/R:
Quickly press:
Press to switch the current channel and the wireless remote sensor can be fixed in the current channel.
When switching to"CH8", after 5s, the temperature and humidity of Wireless remote sensors will be displayed in turn,
each will show 5 seconds.
Long press(5s):
It can reset the synchronization between the Temperature and humidity monitor and all Wireless remote sensors.
After resetting, the Wireless remote sensor needs to be re-powered (Re-install the battery) before it synchronize with the Temperature and humidity monitor. (within 2 minutes).
♥
What You Get:
(IBS-M1 WiFi Gateway)
1*IBS-M1 WiFi Gateway
1*English Manual